|
Configuring Internet Explorer 5.0 & Outlook Express 5.0
For Warp 8's Service
Internet Explorer 5.0/Outlook Express 5.0 Setup Instructions
For Windows 95/98
This documentation was last updated 05/15/2000
Thank you for choosing Warp 8 as your Internet Service Provider. The following instructions
will assist you with configuring your Internet Explorer 5.0 and Outlook Express 5.0 software for
use with Warp 8 Internet Service. These instructions assume that Internet Explorer 5.0/Outlook Express 5.0
are already installed on your computer.
As stated in the Warp 8 Dial-Up Access Terms of Service, Warp 8 does not provide support
for software installed on your machine. We have provided the information below as a
convenience to you, based on Warp 8's experience with software installation. Please be
aware, however, there are many variances due to the setup of each individual machine,
and we encourage you to contact the software manufacturer's technical support for
assistance if the configurations provided in this documentation do not work on your
machine.
Important Notes:
This documentation applies to Internet Explorer 5.0 and Outlook Express 5.0, for Windows 95
and 98 systems. This documentation does not apply to earlier versions of Internet Explorer, nor
Internet Explorer 5.0/Outlook Express 5.0 for other operating systems. If you are using another
version of Internet Explorer, or using another operating system other than Windows 95 or 98,
please contact Warp 8 Customer Support for assistance:
techsupport@warp8.com.
If you were previously using Internet Explorer 4.0/Outlook Express 4.0, and they were already
configured for your Warp 8 connection, all settings should be retained with the upgrade to version
5.0, meaning that there should be no need to follow the configuration information below.
If you installed your Warp 8 configuration using Warp 8's Windows 95/98
Installation Disk, Internet Explorer 5.0/Outlook Express 5.0 should already be configured
with your Warp 8 information. If you did not use a disk to install your Warp 8 configuration,
or you installed your Warp 8 configuration using Warp 8's Windows 95/98 Dial-Up Kit or
Installation Disk, these manual configuration instructions will be necessary.
Configuring Internet Explorer 5.0
1. Connect to Warp 8.
2. Start Internet Explorer 5.0. (doubleclick the icon labeled Internet Explorer on your desktop).
3. Click Tools.
4. Click Internet Options.
5. For Address:, type: http://www.warp8.com
6. Click OK.
7. Close Internet Explorer.
Configuring Outlook Express 5.0
1. Start Outlook Express 5.0 (doubleclick the icon labeled Outlook Express on your desktop).
2. Click Tools.
3. Click Accounts.
4. Click the Mail tab.
5. Click Add.
6. Click Mail.
7. For "Display Name", type your actual name ( or any
'friendly name' you would like to use).
8. Click Next.
9. Select I already have an e-mail address that I'd like to use.
10. For "E-mail address", type your Warp 8 e-mail address (all lower case letters).
11. Click Next.
12. Select POP3, so that the first option reads, "My incoming mail server is a POP3 server".
13. For "Incoming mail (POP3, IMAP or HTTP) server", type mail.warp8.com
14. For "Outgoing mail (SMTP) server", type mail.warp8.com
15. Click Next.
16. For "Account Name", type your Warp 8 username (all lower case letters).
17. For "Password", type your Warp 8 password (case sensitive).
18. If you would like Outlook Express to save your password so that you do not have to enter it
each time you check your e-mail, check Remember password.
19. Click Next.
20. Click Finish.
21. Click Close.
Customer Support
Warp 8: 1-303-421-5166 (for configuration and connection support)
1-888-74WARP8 (for configuration and connection support)
1-303-421-5199 (fax)
Microsoft: 1-800-426-9400 (For Internet Explorer and Outlook Express software support)
http://www.microsoft.com/support/
|